|
|
| |
|
The Netsys 24+2G Hyper Connect Managed Switch provides high performance layer |
|
2 GigaBit Ethernet Switching and Bandwidth Management Per Port (100Kbps to 100Mbps) |
|
at an affordable price. The NS-2024S features 2 X 10/100/1000Mbps RJ-45/SFP Ethernet |
uplink ports, 24 X 10/100Mbps RJ-45 Ethernet ports, QOS VLAN and much more. |
NS-2024S also supports IGMP snooping by 256 IP multicast table for VOD (Video on demand) |
and video conference and Internet games application. |
In addition to the unique bandwidth management feature, the NS-2024S Hyper Connect |
24-Port Managed GigaSwitch supports a variety of standards based advanced switching |
features including Quality of Service (QOS) with priority queuing, VLAN and Dynamic VLAN, |
IGMP snooping (multicast), and link aggregation (LACP). The NS-2024S security features |
include a password protected Security Manager, MAC-based port security, and port based |
network access control (802.1x). Hyper Connect Managed Switches can be managed through |
the imbedded based network access control (802.1x). Hyper Connect Managed Switches |
can be managedthrough the imbedded command line interface (CLI), via Web Browser, or |
through SNMP-based management console applications. Firmware upgrades are available |
through TFTP and XMODEM. Hyper Connect Managed Switches can also be stacked to |
increase network density. |
|
|
• Provides 2 x 10/100/1000Mbps auto-sensing RJ-45(Copper mode) or SFP Auto-link and |
 Hot Swap Ethernet ports for connects trunking |
• Provides 24 x 10/100Mbps auto-sensing RJ-45 Ethernet ports |
• Supports Copper/ Fiber Auto-Link with hot swap for Gigabit Ethernet port |
• Supports HOL (Head Of Line) blocking prevention |
• Supports IEEE802.3ad port trunking |
• Supports IEEE 802.1q tagging VLAN, IEEE 802.1v protocol VLAN, port base VLAN. |
• Supports IEEE802.1x port base network control access |
• Supports IEEE-802.1p QOS |
• Supports IEEE 802.1d Spanning trees |
• Supports port Mirroring (Sniffer), Broadcast Storm filtering, |
• Supports MAC filtering / Learning limit |
• Supports BOOTP/DHCP Client |
• Supports Telnet for remote control access and WEB Base for Management |
• Supports SNMP v1 RFC-1493 Bridge MIBs, RFC-1643 Ethernet MIB, RFC-1213 MIB II |
• Supports RMON groups 1(Statistics), 2(Alarm), 3(Event), 9(History)/ RFC-1757 |
• Supports TFTP/XMODEM for firmware upgrade |
• Supports In-Band/Out-of-Band Management |
• EMI certified by FCC |
|
|
|
Standard: |
IEEE802.3 standard |
IEEE802.3u standard |
IEEE802.3z standard |
IEEE802.3ab standard |
|
Interface: |
24 * RJ-45 10/100Mbps Ethernet port |
2 * RJ-45/SFP 10/100/1000Mbps connector |
|
Flow control: |
Full duplex: IEEE 802.3x |
Half duplex: Back pressure |
MAC address table: |
6K Entries |
LED indication: |
Power |
Link/Active/Speed/Duplex Status for Ethernet port |
Internal switching poweradapter Input: |
AC 85-265 volts/50-60Hz/1A |
Power Consumption: |
16W |
Operating Temperature: |
0°C ~ 50°C (32°F ~ 122°F) |
Storage Temperature: |
-20°C ~ 65°C (-4°F ~ 149°F) |
Humidity: |
10 to 90% (non-condensing) |
Dimensions: |
443.6 x 209 x 44 mm |
|
|
|
| |
|
| |
|
|
| |
|
| |
|
