|
|
| |
|
The Netsys HPNA Ethernet Modem (NH-300SP) provides a cost effective, |
standards-based HPNA Modem for home phoneline networking, hotel/motel, and |
|
multi-tenant applications. The NH-300SP is compatible with Netsys HPNA |
Products and other standards-based HPNA products such as Broadband Routers |
with integrated HPNA capabilities. |
The NH-300SP is HPNA 1.1 compliant and comes ready to plug and play out of |
the box for distances up to 1,600 feet (500m) at the default line rate of 1Mbps. |
The HPNA Ethernet Modem operates over existing phone lines or network grade |
cable (1 twisted pair) and features dual Ethernet ports and a built-in POTS/ISDN |
splitter to allow telephone (POTS/ISDN/PBX) service over the same phone line or |
cable. The NH-300SP's Line port is connected to RJ-11 telephone jack of the |
2-wire twisted pair phone line (or network cable) connection extending |
throughout the home or from the central office location. The Phone port connects |
Ethernet ports connect to a NIC, hub, switch, or other network devices including |
IP phones. |
|
|
• Compliant with 1M HomePNA V1.0 / 1.1 Specifications |
• Compliant with IEEE 802.3 & 802.3u Standard |
• Support 802.1x and back pressure flow control |
• Driver power up to 500 meters with 24 gauge phone wire |
• Build in POTS / ISDN filter (splitter) |
• Connects 10/100Base-T to HomePNA |
• Provides two RJ-11 for HomePNA & Line port and two RJ-45 for 10/100Base-T port |
• Support Auto MDIX for Fast Ethernet ports |
• Support 4 wires pass through phone set |
• Supports 1522 Long packet |
• Supports broadcast storm filtering |
• Plug & Play, no software require |
• No need to Re-wire for RJ-11. |
• Uses existing phone jacks |
• EMI certified by FCC & CE Class B
|
|
Standard: |
IEEE802.3 standard |
IEEE802.3u standard |
Compliant with 1M Home PNA V1.0 / 1.1 Spec. |
Interface: |
2 * RJ-45 10/100Mbps Ethernet port (Auto MDIX) |
2 * RJ-11 for 1Mbps HomePNA (one for splitter) |
Flow Control: |
Back pressure |
Filter/Forward Rate: |
148,800 packets/second for 100Mbps |
1,488 packets/second for 1Mbps |
MAC Address Table: |
2K |
LED indication: |
Power LED |
Link/Active Status for Ethernet port * 2 |
Link Status for HPNA port |
Switch method: |
Store and forward |
Band Pass Spectrum: |
5.5Mhz ~ 9.5Mhz |
Splitter Spectrum: |
0 ~ 1.1Mhz |
Operating Temperature: |
0°C ~ 50°C (32°F ~ 122°F) |
Storage Temperature: |
-20°C ~ 70°C (-4°F ~ 158°F) |
Humidity: |
10 to 90% (non-condensing) |
Dimensions: |
95 x 110 x 24 mm |
External Power Adapter: |
Input: AC 100-240 volts / 50-60Hz |
Output: DC 5V / 1A |
|
|
|
| |
 |
| |
|
|
| |
|
| |
|
