|
|
| |
|
The Netsys NM-102 KIT including NM-102 A20 (Master) & NM-102 B20 (Slave) is a |
converter that translates transmission signals from a twisted-pair 100BASE-TX cable |
to 100BASE-FX fiber optic cable(UTP). The converter automatically adapts to the |
highest level of performance supported by the device connected to the ETHERNET |
port. When the device is a switch or a workstation that supports full duplex, the |
|
converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. |
When the device connected is a hub or a workstation that supports only half duplex, |
the converter adapts to the half-duplex mode and provides the nominal 100Mbps |
bandwidth. In fiber-optic interface, the port of converter operates at 1310 nm and use |
WDM connector. Single-mode model that supports distance up to 20-km is available. |
|
|
• Support auto-MDIX and 10/100Base T for RJ-45 port |
• Complies with IEEE 802.3 for 10BaseT/802.3u for 100Base-TX and 100Base-FX. |
• Supports WDM duple mode for TX/RX on single fiber cable |
• Compact in size, easy installation |
• Data Transfer Rate: 100Mbps |
| • Duplex mode support: Full or half-duplex mode by Auto-Negotiation |
• LED indicators: PWR, LNK/ACT, SPD, FDX for copper RJ-45 LINK/ACT, FDX for Fiber optic. |
• Fiber: Single Mode: 8.3/125, 8.7/125, 9/125µm optic fiber and up to 20km |
• EMI certified by CE, FCC |
• External Power Adapter:Input:AC 85~240 volts/50~60Hz.Output:DC 5V/1A |
|
|
Model: |
NM-102A |
NM-102B |
Protocol and Standards: |
IEEE802.3 & IEEE802.3u |
Maximum Speed: |
Full Duplex: 200Mbps for 100Base-Tx |
Half Duplex: 100Mbps for 100Base-Tx |
Cabling: |
Ethernet: 100Base-TX 2 pair Cate.5 UTP Cable |
Fiber: Single Mode 8.3/125, 8.7/125, 9/125µm |
Modes: |
Full or half-duplex mode, Auto-Negotiation |
Packet Forwarding Rate (64Bytes): |
14880pps@10Mbps / 148800pps@100Mbps |
Connector: |
Copper: RJ-45 |
Fiber: Single SC-type connector |
TX Optical Frequency: |
1550nm(1480~1580nm) |
1310nm(1260~1360nm) |
|
RX Optical Frequency: |
1310nm(1260~1360nm) |
1550nm(1480~1580nm) |
Max. / Min. Optical Launch Power: |
–8dBm / -14dBm |
Optical Receive Sensitivity: |
–31dBm |
| |
|
Specification for Optic Fiber |
Single-Mode Fiber: |
Diameter: 10/25μm wavelength |
1300 (1270~1355) nm |
Multi-Mode Fiber: |
Diameter: 62.5/125μm wavelength |
850 (1270~1355) nm |
Diameter: 62.5/125μm wavelength |
1300 (1270~1355) nm |
| |
|
General Specification |
Operating Temperature: |
0°C ~ 60°C (32°F ~ 140°F) |
Storage Temperature: |
-20°C ~ +65°C (-4°F ~ 149°F) |
Humidity: |
Up to 90% (non-condensing) |
Dimension: |
70(W) x 94(L) x 26(H) mm |
|
|
|
| |
|
| |
|
