|
|
| |
|
The Netsys Power over Ethernet (PoE) Adapter. It delivers data and electrical power to |
access points using standard Category 5 Ethernet cable. This eliminates the need for |
electrical cable and power converters at each access point location. |
The Power over Ethernet (PoE) Adapter is easy to install. It's Plug n Play and requires no |
tools or software. Best of all, the PoE is lightweight and compact size means you can locate |
it virtually anywhere and never know it's there. The PoE transfers data on Category 5 |
Ethernet cable pairs 1/2 and 3/6. Power is transmitted on unused Ethernet pairs 4/5 and 7/8. |
It has an operational range up to 328 ft./100m, which is a requirement of the Fast |
Ethernet standard. |
Terminal Unit with the PoE you can mount devices such as an access point virtually |
anywhere in a building without worrying about the location of a power supply. |
|
|
• Comply with IEEE802.3af, Power over Ethernet, IEEE802.3/802.3u 10/100Base-TX |
• Provides 48V DC power over RJ-45 Ethernet cable to device with Ethernet port |
• LED indicators power input indication |
• Distance up to 100 meters with RJ45 Ethernet cable |
• Auto-detect of PoE 802.3af equipment, protect devices from being damaged by |
 incorrect installation |
• Choice of powered device for 5V DC, 9V DC or 12V DC |
|
|
Input Specification |
Input Signal: |
IEEE 802.3af compliant signal from PSE |
Data Interface: |
RJ-45 Jack (See Pin Assignment) |
Input Voltage: |
36 ~ 57 V DC |
Input Current: |
350mA MAX. |
Input: |
@Vin=48V DC |
Output Specification |
Connect PSE power Interface: |
DC-Jack |
Interface: |
Output Voltage: |
5Vdc/9Vdc/12Vdc (optional) |
Output Voltage Accuracy: |
±2.0% MAX |
Output MAX Current: |
2000mA for 5V/1100mA for 9V/800mA for 12V |
Output Power: |
10W MAX |
General Specification: |
Operating Temperature: |
-10°C ~ 60°C |
Storage Temperature: |
-20°C ~ +70°C |
Humidity: |
Up to 90% (non-condensing) |
Cooling: |
Free air convection |
Dimension: |
56.4(L) x 66(W) x 25(H) mm |
|
|
|
| |
|
| |
|
