NVF-200SE system delivers power and IP connectivity at distances up to 1000m (3,280feet)

using existing phone wire. Innovative transmission techniques result in power feeding and

data over a single pair phone wire and are ideal for deploying extended Ethernet where there

are no or limited electricity at one end, this will ensure reliable delivery of essential power

and data to and from remote locations. Operators in various enterprises will now be able

to deploy PoE devices in any service location, install network security cameras, wireless access

point security / VOIP, or access control systems in any place where you have basic wire

connectivity.

The NVF-200SE and NVF-200PD provide extended-length power and Ethernet connections

over single pair of phone wire: Cat. 3 or greater. The NVF-200SE/PD works as Ethernet

to/from VDSL subscriber-site conversion bridge. The NVF-200SE/PD uses VDSL technologies,

which supports 5M/ 15/ 25Mbps per port symmetrical bandwidth over phone wiring with long

driver capable of a maximum 1000m (3,280 feet).

The front-panel provides LED indicators of power system and interface status. Link or Active of

LAN operation is automatically sensed and configured. VDSL link rates are configured by

NVF-200SE over DIP switch. Therefore, NVF-200SE/PD supports auto/fixed speed, plug & play

operations on the subscriber site, and power protections as OVP (Over Voltage Protection),

OCP (Over Current Protection), OTP (Over Temperature Protection), robust short-circuit

protection and surge protection, as well as are part of an ideal solution for delivering cost-

effective, high-performance broadband / multimedia services to point to point application.

• Supports 10/100M auto MDI/MDIX Ethernet port

• Supports 5/15/25Mbps fixed/auto speed VDSL ports

• Supports PBO(Power back off) function(NVF-200PD Only)

• Supports flow control

• Supports long packet up to 1536 byte

• Maximize network uptime and centralize power for all remote devices.

• Support VDSL and Ethernet surge protection

• Connect to standard IEEE 802.3af Ethernet PD; class 0, 1, 2, or 3.

• Remove the 100m-distance limitation of Ethernet – for both PoE power and data.

• Combine data and power over single pair of twisted phone cable.

• Easily add/move/change to any location over existing or newly pulled wires

• Configure speed using the DIP switch.

• Reduce engineering time and eliminate requirements for new power sources

for remote Ethernet devices.

NVF-200SE

NVF-200PD