Welcome to Netsys
National Enhance Technology Corp.
Home » Products » Product Category »VDSL2 » NV-600L » NV-600R » NV-600A »NV-600W » NV-802S » NV-202 » NV-202P
NV-600L ( VDSL2 CO Router)
General Description
Netsys NV-600 Series is a VDSL2 Router that leverages the extraordinary bandwidth
promise of VDSL2 (max. 100Mbps Symmetric) technology, the next step in the
delivery of new high-speed Internet applications to end-users in their homes or
offices. Quick, easy and economical to install and maintain, the NV-600L works
with the NV-600R over existing copper wire infrastructure. NV-600L is a CO
(Central Office) device while NV-600R is a CPE (Customer Premise Equipment) device.
Netsys NV-600 Series will allow operators worldwide to compete with cable and
satellite operators by offering services such as HDTV, VOD, videoconferencing,
high speed Internet access and advanced voice services including VoIP, over a
standard copper telephone cable.
Netsys NV600 Series is seen by many operators as an ideal accompaniment to a
FTTP rollout, where for instance fiber is supplied direct to an apartment block and
from there copper cable is used to supply residents with high-speed VDSL2.
Key Features & Benefits
• Compliant with IEEE 802.3 & 802.3u Ethernet Standard
• Compliant with ITU-T G993.2 VDSL2 standard
• Provides 4 x 10/100M auto-negotiation RJ-45 Ethernet port
• Supports Bandwidth up to 100Mbps over RJ-11 ports
• Provides POTS / ISDN Splitter on board
• Supports Downstream Power Back-Off(DPBO)
• Supports auto speed for VDSL2 port
• Supports Web management(HTTP), TFTP, Console(RS232C)
• Supports uPnP/PPPoE/NAT/DHCP/DMZ/Firewall
• Supports Router & Switch(Bridge) mode
• Supports Loop back test
• Supports SNR indicator for check phone wiring quality
• Supports Interleave delay for Data Error & Noise Against
• Support 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a band profile
• Support 997,998 band plan
• Provides surge protection for VDSL2 port
• EMI Compliant: CE, FCC, VCCI
Product Specifications
IEEE802.3 standard
IEEE802.3u standard
ITU-T G993.2 VDSL2 standard
4 x RJ-45 10/100Mbps Ethernet port
1 x RJ-11 connector for VDSL2
1 x RJ-11 connector for POTS/ISDN device
1 x console port(RS232C/115200bps)
Band Profile:
8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a
Band Plan:
997, 998
Max. Bandwidth:
Symmetric 100 Mbps / 0.3 Km
LED indication:
1 x Power LED
4 x Link/Active Status for Ethernet port
1 x Link LED for VDSL2 port
Switch method:
Store and forward
External Power Adapter:
Input: AC 85~240 volts / 50~60Hz
Output: DC 12V / 1A
Flow control:
Full duplex: IEEE 802.3x
Half duplex: Back pressure
Typical Power Consumption:
Operating Temperature:
0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature:
-20°C ~ 70°C (-4°F ~ 158°F)
10 to 90% (non-condensing)
184 x 146 x 40 mm (7.2" x 5.74" x 1.57")
Lantiq MIPS ADM5120P
Lantiq VINAX
Specifications in this datasheet are subject to change without prior notice.
Application Diagram
Detailed View
Copyright © 2008, National Enhance Technology Corp., All rights reserved.